Install the REDCAST Module

REQUIRED TOOL(S): T20 Torx^® driver

1. Turn off the camera.

2. Install a +1 Adaptor Module or a Module Adaptor. For more information about how to install adaptor modules, see the camera operation guides.

3. Insert the lip at the top of the REDCAST^® Module into the recess at the top of the adaptor module.

   

   Figure: Insert Module Lip

4. Rotate the REDCAST Module down flush with the rear of the adaptor module.

5. Apply pressure and use a T20 Torx driver to turn the lock on the bottom of the adaptor module clockwise into the Lock position.

   

   Figure: Lock In Module

   The REDCAST Module is secured

   

   Figure: REDCAST Module Installed